Hydroponics Shop
Search Your Cart   Continue Shopping

Bluelab conductivity probe care

£ 11.95
Bluelab conductivity probe care

The instrument is only as accurate as the probe is clean.

Probe cleaning is one of the most important parts of owning or operating any  Bluelab monitor or controller.

If the probe is contaminated or dirty, it affects the accuracy of the reading displayed. The Bluelab Truncheon® Meter and Bluelab Conductivity Probes read low when the probe is contaminated.

The probe surface is where the instrument takes the reading of the solution. The information is sent back from the probe to the electronic brain of the instrument. A calculation is then done in the instruments brain or micro-computer and a reading is then displayed. If the information sent back from the probe is inaccurate due to probe surface contamination then the reading will be inaccurate.

Cleaning the conductivity probe is a very easy task and prolongs the life of your probe.

  • Cleaning instructions inside box lid
  • 500ml 2.77 EC Conductivity Standard Solution
  • Decanter vessel
  • Bluelab Conductivity Probe Cleaner
  • Bluelab Chamois(probe cleaning instrument)